Est-que vous s'inquiétez encore à passer le test Certification 1Y0-A21 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Citrix 1Y0-A21? Si vous voulez réussir le test Citrix 1Y0-A21 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.
But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test Citrix 1Y0-A21 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test Citrix 1Y0-A21, votre argent sera tout rendu.
C'est sûr que le Certificat Citrix 1Y0-A21 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Citrix 1Y0-A21, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Citrix 1Y0-A21 peut bien tester la professionnalité de IT.
Code d'Examen: 1Y0-A21
Nom d'Examen: Citrix (Basic Administration for Citrix NetScaler 9.2)
Questions et réponses: 104 Q&As
Il y a plusieurs de façons pour réussir le test Citrix 1Y0-A21, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.
Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Citrix 1Y0-A21 à la première fois.
1Y0-A21 Démo gratuit à télécharger: http://www.pass4test.fr/1Y0-A21.html
NO.1 Scenario: A network administrator needs to configure routing on a NetScaler appliance. The NetScaler
is in a DMZ whose gateway is 10.54.80.1/24. There are no configured routes on the NetScaler.
Given this topology, which is the appropriate routing configuration for the NetScaler?
A. set default route 10.54.80.1
B. add route 0.0.0.0 0.0.0.0 10.54.80.1
C. set default route 0.0.0.0 0.0.0.0 10.54.80.1
D. add route 0.0.0.0 255.255.255.255 10.54.80.1
Answer: B
Citrix examen 1Y0-A21 examen 1Y0-A21 1Y0-A21 examen 1Y0-A21
NO.2 Scenario: A company has contracts with multiple ISPs and would like to use all of them for Internet
connections although some ISP routers are faster than others. The company also plans to use a
NetScaler system for load balancing and failover.
What can an administrator configure to ensure that all ISP connections are being used while avoiding
retransmission or out-of-order packets in this environment?
A. Multiple VLANs with Ingress rules
B. Link load balancing with destination IP-based persistence
C. Round robin load balancing with reverse RNAT configured
D. A load balancing policy with the appropriate preferred IP and preferred port parameters configured
Answer: B
Citrix 1Y0-A21 examen 1Y0-A21
NO.3 Which IP address type must be unique to each NetScaler in an HA pair?
A. MIP
B. NSIP
C. SNIP
D. Load balancing VIP
Answer: B
Citrix examen certification 1Y0-A21 1Y0-A21 examen 1Y0-A21
NO.4 Scenario: An administrator needs to configure a NetScaler device so that a set of back-end servers in a
LAN can initiate connections to the Internet. ACLs are configured in this environment. What must the
administrator configure to meet the needs of this scenario?
A. INAT on the servers in the LAN
B. RNAT for the destination IP addresses
C. NAT on the router to the NetScaler device
D. RNAT for the subnet that includes the LAN IP addresses
E. RNAT on the virtual servers bound to the servers in the LAN
Answer: D
Citrix examen 1Y0-A21 1Y0-A21 examen 1Y0-A21
NO.5 Scenario: A financial company needs to maintain end-to-end security in network traffic. The company
also requires that an administrator reduce the CPU levels for back-end servers in their environment
because it requires end-to-end security.
Which setting on the SSL virtual server reduces CPU utilization on the back-end?
A. SSLv3
B. SSL Redirect
C. SSL Session Reuse
D. SSL Client Certificates
Answer: C
Citrix 1Y0-A21 1Y0-A21 1Y0-A21 1Y0-A21
NO.6 Scenario: An administrator is working with a Citrix consultant to architect and implement a NetScaler
solution. They plan to use GSLB and DNS views in the environment.
In which two manners can the administrator configure the NetScaler system to be able to configure DNS
views that support GSLB records? (Choose two.)
A. Configure as an ADNS.
B. Configure as a DNS proxy.
C. Configure CNAME records.
D. Configure as an End resolver.
Answer: A, B
Citrix 1Y0-A21 1Y0-A21 examen 1Y0-A21 1Y0-A21
NO.7 In which two ways could an administrator configure a NetScaler system to allow a Web server log to
record the original client IP addresses for incoming traffic? (Choose two.)
A. USIP
B. INAT
C. USNIP
D. Edge mode
E. Client IP insertion
Answer: A, E
certification Citrix 1Y0-A21 examen 1Y0-A21 1Y0-A21
NO.8 Scenario: A network administrator needs to configure VLANs on a NetScaler to support multiple
networks. The NetScaler is connected through interface 1/1 to a switch port where VLAN10 is configured.
This NetScaler is also connected through interface 1/2 to a switch port that is configured for VLAN20.
Given this scenario, which two steps does the administrator need to take to configure the NetScaler for
VLAN10? (Choose two.)
A. add vlan 10
B. set vlan 10 -ifnum 1/1
C. bind vlan 10 -ifnum 1/2
D. bind vlan 10 -ifnum 1/1
E. bind vlan 10 -ifnum 1/1 -tagged
Answer: A, D
Citrix 1Y0-A21 examen certification 1Y0-A21 1Y0-A21 examen
NO.9 Scenario: A customer has two datacenters in geographically dispersed locations, both serving content
for a web-based application. Content for both datacenters should always be available.
Which method should an administrator use to make content from both datacenters available at all times?
A. HA
B. GSLB
C. Content switching
D. Backup load balancing virtual servers
Answer: B
certification Citrix 1Y0-A21 1Y0-A21 1Y0-A21 examen
NO.10 Scenario: An administrator is managing a network environment that contains five datacenters, all of
which are in different areas of the same country. The administrator plans to configure the NetScaler
system to load balance the datacenters so that they can be used for disaster recovery.
How should the administrator configure the NetScaler system for disaster recovery and to optimize the
user experience?
A. Enable HA and use cache load balancing.
B. Enable HA and use server load balancing.
C. Enable GSLB and use the proximity method.
D. Enable GSLB and use the round robin method.
Answer: C
Citrix examen 1Y0-A21 1Y0-A21 examen
NO.11 Scenario: A company has contracts with multiple ISPs and would like to use all of them for Internet
connections. The company also plans to use a NetScaler system for load balancing and failover.
What can an administrator configure to ensure that all ISP connections are being used and return traffic
maintains the same path as the inbound traffic in this environment?
A. Round robin load balancing with INAT configured
B. Link load balancing with RNAT and USNIP enabled
C. Multiple VLANs with Ingress rules and USIP enabled
D. A load balancing policy with the appropriate preferred IP and preferred port parameters configured
Answer: B
Citrix examen 1Y0-A21 examen 1Y0-A21 examen certification 1Y0-A21 certification 1Y0-A21 1Y0-A21 examen
NO.12 A network administrator wants to ensure that connection multiplexing is enabled for all client
connections that hit a virtual server. Which service type should the administrator select to enable
connection multiplexing?
A. SSL
B. FTP
C. TCP
D. HTTP
Answer: D
Citrix examen 1Y0-A21 1Y0-A21 1Y0-A21
NO.13 An administrator needs to configure a NetScaler system to dynamically advertise virtual IP addresses,
directly connected routes and static routes to the upstream routers.
What must the administrator ensure is configured on the NetScaler system for this environment?
A. RNAT
B. L3 mode
C. Static Routes
D. Health Check monitor
E. Route Health Injection (RHI)
Answer: E
certification Citrix 1Y0-A21 1Y0-A21 1Y0-A21
NO.14 Scenario: A customer has an HA pair configured and is making interface configuration changes on the
primary node. However, the administrator notices that the changes are NOT being propagated to the
secondary node.
What is the reason for this behavior?
A. Propagation is not enabled.
B. HA pair licensing is missing.
C. Propagation is enabled, but synchronization is disabled.
D. Interface configuration changes must be performed on each node.
Answer: D
Citrix certification 1Y0-A21 1Y0-A21 certification 1Y0-A21
NO.15 In which manner can an administrator configure a NetScaler device so that it can load balance external
DNS servers.?
A. Configure as an ADNS.
B. Configure CNAME records.
C. Configure as a DNS proxy.
D. Configure as an End resolver.
Answer: C
certification Citrix certification 1Y0-A21 1Y0-A21 1Y0-A21 1Y0-A21
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Citrix 1Y0-A21.
没有评论:
发表评论