Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.
Il y a plusieurs de façons pour réussir le test EMC E20-335, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.
Avec l'aide du Pass4Test, vous allez passer le test de Certification EMC E20-335 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de EMC E20-335, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test EMC E20-335, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test EMC E20-335 coûtant un peu d'argent.
Code d'Examen: E20-335
Nom d'Examen: EMC (Symmetrix Solutions Specialist Exam for Implementation Engineers)
Questions et réponses: 105 Q&As
Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de EMC E20-335 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test EMC E20-335 qui vous amenera le succès du test EMC E20-335, au lieu de traivailler avec peine et sans résultat.
Vous aurez une assurance 100% à réussir le test EMC E20-335 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
E20-335 Démo gratuit à télécharger: http://www.pass4test.fr/E20-335.html
NO.1 Refer to the exhibit
What is the correct state for the Standard and Rl-BCV prior to issuing a symreplicate start command?
A. Synchronized
B. Suspended
C. Split
D. Write-Enable
Answer: C
certification EMC certification E20-335 E20-335
NO.2 Where is the volume Logix Database maintained starting with DMX-3?
A. VCM gatekeeper
B. Symmetrix logical Volume
C. Symmetrix File System
D. VCM database.
Answer: C
certification EMC certification E20-335 E20-335 E20-335
NO.3 How does Delta Set Extension help in an SRDF/A deployment?
A. Reduces RPO
B. Reduces the amount of required cache
C. Improves response time
D. Absorbs bursts of host writes
Answer: D
certification EMC E20-335 examen E20-335
NO.4 Which file contains the parameter that can change the default behavior of SYMCLI operations, and
there control actions?
A. SYMCLI options File
B. SYMAPI Options File
C. SYMCLI Command File
D. SYMAPI Command File
Answer: B
EMC E20-335 examen E20-335 E20-335 examen E20-335
NO.5 What is recommended before creating a TimeFinder/Mirror replica?
A. Ensure that the production application using the source devices is shut down
B. Ensure that all writes from the production application using the source devices are paused!
C. Ensure that the BCVs are not being actively accessed
D. Set the BCVs to a Not Ready state
Answer: Chttp://www.scribd.com/doc/37352326/Emc-Study-2
NO.6 Refer to the exhibit.
A database server has its logs stored on a volume on the log source Symmetrix V-Max array and its data
stored on a volume on the data source Symmetrix V-Max array. Both source Symmetrix V-Max array
frames replicate data to the target Symmetrix V-Max array at the Remote site. There are two device
groups that have been defined:
One group for the data volume on the Symmetrix containing the data LUNs
One group for the log volume on the Symmetrix containing the log LUNS
What happens if the SRDF inks between the Symmetrix contain the data LUNs and the target Symmetrix
were to fail?
A. The R2 data in the database remains consistent because Enginuity Consistency Assist (RDFECAJ
technology would ensure data consistency).
B. The data in the database becomes inconsistent at the Remote site.
C. An SRDF failover would be initiated on all volumes and processing will automatically be switched over
to the Remote site
D. The R2 volumes in the Symmetrix V-Max containing the log LUNs would become write-disabled to the
database server
Answer: C
EMC E20-335 certification E20-335 certification E20-335
NO.7 You have been asked to create a configuration for a single engine Symmetric V-Max array with 8 DAEs
and 64 drivers. They would like to have the data devices with RAID 5(7+1) protection.
What would be the largest number of members you would recommend for a stripped metavolume.?
A. 4
B. 16
C. 8
D. 32
Answer: B
EMC certification E20-335 E20-335 certification E20-335 E20-335
NO.8 On the Symmetrix platform, which type of RAID protection ensures the best random write performance?
A. RAID 1
B. RAID S
C. RAID 6
D. RAID 5
Answer: A
certification EMC E20-335 E20-335 E20-335 examen
NO.9 One of the requirements, during an Open Replicator implementation is that production application
should not be implemented by open Replication session. An analysis of the control Symmetrix showed
that FA ports are currently 70% utilized. How should pace and ceiling be configured?
A. Pace should be set to 0 and Ceiling should be left at the default
B. Pace should be left at the default and Ceiling set to 30
C. Pace should be left at the default and Ceiling set to 100
D. Pace should be set to 9 and Ceiling should be set to 70
Answer: B
EMC certification E20-335 E20-335 examen E20-335 E20-335
NO.10 Open Replicator pull will be used to move data between a third party array and a Symmetrix V-Max
array.
What is recommended before starting the Open Replicator session?
A. Ensure that the remote devices are Host read/write enabled
B. Ensure that the control devices are Not Ready
C. Ensure that the remote devices are Host inaccessible
D. Ensure that the control devices are Write Disabled
Answer: C
EMC examen E20-335 examen E20-335 certification E20-335
NO.11 Diagnostic messaging for the GNS daemon is written to which file?
A. /7SYMAPI/emc/storgnsd .log0
B. /SYMAPI/log/storgnsd.log0
C. /SYMAPl/usr/storgnsd log0
D. /SYMAPl/bin/storgnsd log0
Answer: B
EMC E20-335 E20-335 examen
NO.12 Which command is used to set or reset HBA port flags on Symmetric arrays running Enable 7.0
Enginuity 5874?
A. symcfg
B. symmask
C. symconfigure
D. symaccess
Answer: D
EMC certification E20-335 E20-335 E20-335 examen E20-335
NO.13 An SRDF failover has been executed during the testing phase of an implementation. What is the
expected status of the R1 and R2 devices after performing SRDF failover operation?
A. R1 and R2 Not Ready
B. R1 Wnte Disabled; R2 Read/Wnte
C. R1 Read/Wnte, R2 Read/Wnte
D. R1 Read/Wnte. R2 Wnte Disabled
Answer: Bhttp://www.scribd.com/doc/29541661/Srdf-Operations-white-Paper
NO.14 In symmetric V-max series array running Enginuity 5874, which device is used as a pass-through
device for Auto provisioning?
A. VDEV
B. VCM
C. ACLX
D. SFS
Answer: C
certification EMC E20-335 examen E20-335 examen E20-335 certification E20-335
NO.15 What is required to ensure the integrity of data on the R2 volume during a SRDF fallback operation?
A. Remove entries from the file system table
B. Stop any applications that are accessing the R2 volume
C. Disable journaling on the file system
D. Suspend the RDF link
Answer: B
certification EMC E20-335 examen certification E20-335
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification EMC E20-335. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
没有评论:
发表评论