Meilleur Microsoft MB7-702 test formation guide

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Microsoft MB7-702, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Microsoft MB7-702. Peut-être d'obtenir le Certificat Microsoft MB7-702 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Microsoft MB7-702 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Pass4Test a de formations plus nouvelles pour le test Microsoft MB7-702. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Microsoft MB7-702 à tous les candidats qui nous choisissent. L'importance de Certification Microsoft MB7-702 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.

Code d'Examen: MB7-702
Nom d'Examen: Microsoft (Microsoft Dynamics NAV 2013 C/Side Development)
Questions et réponses: 82 Q&As

Le produit de Pass4Test peut assurer les candidats à réussir le test Microsoft MB7-702 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Microsoft MB7-702. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.

MB7-702 Démo gratuit à télécharger: http://www.pass4test.fr/MB7-702.html

NO.1 You need to get the list of indexes for a Microsoft Dynamics NAV table from the Microsoft SQL
Server Management Studio. Which command should you use?
A. DBCC SHOW_STATISTICS [<Company Name>$< Table Name>]
B. sp_helpindex [<Company Name>S< Table Name>]
C. sp_helpindex ([<Company Name>$< Table Name>],[$<Key Number>])
D. DBCC SHOW_STATISTICS ([<Company Name>$< Table Name>],[$<Key Number>])
Answer: B

Microsoft examen   MB7-702 examen   MB7-702   certification MB7-702

NO.2 You need to develop a Microsoft Dynamics NAV solution in an environment where many users
use different languages on their computers. What should you do?
A. Develop the solution in different databases (one for each language required).
B. Develop different objects with a different CaptionML for each language required.
C. Develop the solution in American English and provide language-specific names using CaptionML,
OptionCaptionML and InstructionalTextML.
D. Develop the solution in American English and provide language-specific names by using the Tools
menu and clicking Language.
Answer: D

Microsoft examen   MB7-702 examen   MB7-702 examen   MB7-702   MB7-702 examen

NO.3 You need to create a master table representing entities with whom business is conducted.
Which posting group must you include in the table?
A. The Gen. Bus. Posting Group
B. The Gen. Prod. Posting Group
C. The VAT Prod. Posting Group
D. The VAT Bus. Posting Group
Answer: B

Microsoft examen   certification MB7-702   certification MB7-702   MB7-702   MB7-702 examen   MB7-702

NO.4 In Microsoft Dynamics NAV, for which two actions can you use a Microsoft SQL Server
collation? (Each correct answer presents part of the solution. Choose two.)
A. to specify the sort order to use for Unicode data types per company
B. as the code page that is used to store non-Unicode character data per company
C. as the code page that is used to store non-Unicode character data per database
D. to specify the sort order to use for Unicode data types per database
Answer: B,D

Microsoft examen   certification MB7-702   MB7-702   MB7-702   MB7-702   MB7-702

NO.5 What is a function trigger?
A. A system flag (trigger) that is raised whenever a built-in function in Microsoft Dynamics NAV is
run
B. A set of C/AL statements run when called by other C/AL code
C. A system flag (trigger) to indicate to Microsoft Dynamics NAV that a function has run successfully
D. A system indicator that is set when a new record is inserted into a table
Answer: D

certification Microsoft   certification MB7-702   certification MB7-702   MB7-702

NO.6 You need to add a new Text field to the Item table. What is the maximum length of Text fields
in a table?
A. 80
B. 200
C. 250
D. 1024
Answer: C

certification Microsoft   MB7-702   MB7-702   certification MB7-702

NO.7 You have the following C/AL code segment:
ItemLedgerEntry.SETCURRENTKEY("Item No.");
ItemLedgerEntry.FINDSET;
You have the following query, based on the C/AL code segment:
SELECT * FROM "CRONUS International Ltd_$Item Ledger Entry" ORDER BY "Item No_", "Posting
Date", "Entry No_"
Which two statements are true based on the query? (Each correct answer presents a complete
solution. Choose two.)
A. If the second key in the table is "Item No.", then it must be disabled. The key "Item No.", "Posting
Date" will be used instead.
B. The key "Item No.", "Posting Date" is the first key in the list that starts with the field "Item No." in
the Item Ledger Entry table.
C. The SQLIndex value of the key "Item No.", "Posting Date" has been entered with the value "Item
No.".
D. The SQLIndex value of the key "Item No." has been entered with the value "Item No.", "Posting
Date".
Answer: A,D

Microsoft   MB7-702   certification MB7-702
Reference:
http://msdn.microsoft.com/en-us/library/hh168524(v=nav.70).aspx

NO.8 What does the Vendor.SETAUTOCALCFIELDS function call do?
A. It removes the automatic calculation of all FlowFields on the vendor record variable when
retrieving vendor records from the database.
B. It sets the automatic calculation of only the first FlowField on the vendor record variable when
retrieving vendor records from the database.
C. It sets the automatic calculation of all FlowFields on the vendor record variable when retrieving
vendor records from the database.
D. It removes the automatic calculation of only the first FlowField on the vendor record variable
when retrieving vendor records from the database.
Answer: B

Microsoft examen   MB7-702   certification MB7-702   MB7-702

NO.9 Which two actions occur during the test-driven development
(TDD) refactor phase? (Each correct answer presents part of the solution. Choose two.)
A. New test code is written.
B. Production code is written to make the test code pass.
C. Test and production code is redesigned for improvement.
D. Duplication is removed from the test and production code.
Answer: C,D

certification Microsoft   MB7-702 examen   certification MB7-702   MB7-702 examen
Reference:
http://en.wikipedia.org/wiki/Code_refactoring

NO.10 You create a new page in Microsoft Dynamics NAV.
You notice a table 2000000039 printer.
Which type of table is it?
A. System table
B. Special table
C. Virtual table
D. Temporary table
Answer: C

Microsoft   MB7-702   certification MB7-702   MB7-702 examen

NO.11 You are designing a table with a Customer Name field that must not be stored. The table must
derive its contents from the Name field on the Customer table. The Customer Name field must then
be used in a C/AL function. How should you create the Customer Name field and then access it
using C/AL code?
A. Create the Customer Name as a FlowFilter field. In the code, use the CALSUMS function to
evaluate the value of Customer Name.
B. Create the Customer Name as a Normal text field. In the code, use the EVALUATE function to
evaluate the value of Customer Name.
C. Create the Customer Name as a FlowField with a Method set to Lookup. In the code, use the
CALCFIELDS function to evaluate the value of the Customer Name.
D. Create the Customer Name as a FlowFilter field. In the code, use the EVALUATE function to
evaluate the value of Customer Name.
Answer: A

Microsoft examen   MB7-702   MB7-702   MB7-702   certification MB7-702   MB7-702

NO.12 You create a Seminar Registration Line table.
You need to ensure that the Line Discount Amount is always calculated correctly.
You need to add the following code segment to the table:
"Line Discount Amount":= ROUND("Line Discount %" * Item. "Seminar Price" *
0.01,GLSetup. "Amount Rounding Precision");
On which trigger should you add the code segment?
A. OnModify
B. Line Discount Amount - OnValidate
C. Quantity - OnValidate
D. Line Discount % - OnValidate
Answer: D

Microsoft examen   certification MB7-702   MB7-702   MB7-702   MB7-702

Pass4Test est un seul site de provider le guide d'étude Microsoft MB7-702 de qualité. Peut-être que vous voyiez aussi les Q&A Microsoft MB7-702 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.