Le test de Certification HP HP0-Y19 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.
Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test HP HP0-Y19. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.
La Q&A HP HP0-Y19 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification HP HP0-Y19.
Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.
Code d'Examen: HP0-Y19
Nom d'Examen: HP (ProCurve Accelerated ASE Mobility)
Questions et réponses: 63 Q&As
Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test HP HP0-Y19 juste avec la Q&A de HP HP0-Y19 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test HP HP0-Y19. Votre argent sera tout rendu si vous échouez le test.
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
HP0-Y19 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y19.html
NO.1 You configured VLAN 10 and VLAN 24 on a ProCurve Switch 3500yl-48G. The network servers
reside in VLAN 10, which has an IP address range of 10.1.10.0/24. Network clients reside in VLAN
24, which has an IP address range of 10.1.24.0/24. You configure an ACL with these entries and
apply it statically to ports in VLAN 24: permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq ftp
permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq http permit tcp 10.1.24.0 0.0.0.0
10.1.10.10 255.255.255.255 eq telnet What is the effect of these ACLs on the clients located in
VLAN 24?
A.They would have no access at all, because the ACL is misconfigured.
B.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but no access anywhere else.
C.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but full access to everything
else in the 10.1.10.0 subnet.
D.They could not access anything in the 10.1.10.0 subnet, because IP has not been specified in the ACL.
Correct:B
certification HP certification HP0-Y19 HP0-Y19 HP0-Y19 examen
NO.2 On a ProCurve Switch 8212zl, which feature must be enabled before you can enable VRRP?
A.MSTP
B.IP routing
C.IP multicast
D.RIP
Correct:B
certification HP certification HP0-Y19 HP0-Y19 HP0-Y19 examen
NO.3 Port C1 on a ProCurve Switch 5412zl is a tagged member of VLAN 50 and an untagged member
of VLAN 1. Port C2 and port C3 are at default VLAN settings. What is the effect of the following
command entered at the CLI? 5412zl(config)# trunk c1-c3 trk1
A.The trunk is defined as an untagged member of VLAN 1, but port C1 is not included.
B.The trunk is not defined, because the ports' VLAN memberships do not match.
C.The trunk is defined as an untagged member of VLAN 1 and a tagged member of VLAN 50.
D.The trunk is defined as an untagged member of VLAN 1 but is not a member of VLAN 50.
Correct:D
certification HP certification HP0-Y19 HP0-Y19 HP0-Y19 examen
NO.4 Click the Exhibit button. What is the role of this Switch 3500yl in the OSPF routing domain?
A.ASBR
B.virtual router
C.ABR
D.internal router
Correct:D
certification HP certification HP0-Y19 HP0-Y19 HP0-Y19 examen
NO.5 You must configure a ProCurve Switch 8212zl to be the Backup router for a VRID associated
with VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A.It must be an address assigned to a multi-netted interface.
B.It must be an address that is not assigned to any interface on either router.
C.It must match the Backup router's address for the VLAN 10 interface.
D.It must match the Owner router's address for the VLAN 10 interface.
Correct:D
certification HP certification HP0-Y19 HP0-Y19 HP0-Y19 examen
NO.6 Which part of the multicast address range is reserved for applications that will remain within an
enterprise intranet?
A.Internetwork Control Block
B.AD-HOC Block
C.Administratively Scoped Address Block
D.Local Network Control Block
Correct:C
certification HP certification HP0-Y19 HP0-Y19 HP0-Y19 examen
NO.7 You connect an IP telephone that supports LLDP-MED to a port on a ProCurve Switch 5406zl.
The port is a member of a voice VLAN and also requires 802.1X authentication. How will
LLDP-MED and 802.1X interact?
A.The switch will exempt the phone from the 802.1X requirement after confirming its LLDP-MED
information.
B.The switch will submit the phone's authentication credentials to a RADIUS server after the devices
exchange LLDP-MED information.
C.The switch will permit LLDP-MED communication with the phone after authentication is complete.
D.The switch will use information from the phone's first LLDP-MED frame to submit its authentication
credentials.
Correct:C
certification HP certification HP0-Y19 HP0-Y19 HP0-Y19 examen
NO.8 You must configure Multiple Spanning Tree Protocol (MSTP) on two ProCurve 8212zl switches
and four 5406zl switches. Which configuration is necessary to ensure that all of the switches join
the same MST region?
A.The switches must have identical Port Priorities for shared links in each MST instance.
B.Bridge Priorities on all switches must be configured so that each MST instance has a different Root
Bridge.
C.All switch-to-switch links in each MST instance must be tagged members of all user VLANs.
D.The switches must be configured with identical config-names, config-revisions, and VLAN-to-instance
mappings.
Correct:D
certification HP certification HP0-Y19 HP0-Y19 HP0-Y19 examen
NO.9 You are planning a network upgrade at a small company. During a meeting, you learn that the
customer will install VoIP telephones that set Layer 2 priority markers for allvoice traffic, and the
VoIP traffic will not cross any routed links. What is necessary to ensure that ProVision ASIC
switches maintain the priorities set by the phones? (Selecttwo.)
A.LLDP-MED for all voice VLANs
B.an IEEE 802.1p-to-DSCP map for voice traffic
C.port-based priorities for ports connected to phones
D.default QoS settings
E.tagged links for all voice VLAN traffic
Correct:D E
certification HP certification HP0-Y19 HP0-Y19 HP0-Y19 examen
NO.10 Click the Exhibit button. What does this output from the show ip ospf neighbor command
indicate about the OSPF neighbor relationship between this router and the router with ID 10.3.0.1?
A.They are in different OSPF areas.
B.They have not formed an adjacency.
C.They are configured with different OSPF versions.
D.They are not eligible to be elected DR or BDR.
Correct:B
certification HP certification HP0-Y19 HP0-Y19 HP0-Y19 examen
Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test HP HP0-Y19 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
没有评论:
发表评论