2014年4月15日星期二

EMC E20-335 examen pratique questions et réponses

Le Certificat de EMC E20-335 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat EMC E20-335, c'est-à-dire avoir une grande fortune. Le Certificat EMC E20-335 peut bien tester des connaissances professionnelles IT. La Q&A EMC E20-335 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Le test EMC E20-335 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test EMC E20-335 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Selon les anciens test EMC E20-335, la Q&A offerte par Pass4Test est bien liée avec le test réel.

La Q&A EMC E20-335 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification EMC E20-335.

Code d'Examen: E20-335
Nom d'Examen: EMC (Symmetrix Solutions Specialist Exam for Implementation Engineers)
Questions et réponses: 105 Q&As

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification EMC E20-335. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test EMC E20-335. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test EMC E20-335, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

E20-335 Démo gratuit à télécharger: http://www.pass4test.fr/E20-335.html

NO.1 Which command is used to set or reset HBA port flags on Symmetric arrays running Enable 7.0
Enginuity 5874?
A. symcfg
B. symmask
C. symconfigure
D. symaccess
Answer: D

certification EMC   E20-335   E20-335   certification E20-335   E20-335

NO.2 An SRDF failover has been executed during the testing phase of an implementation. What is the
expected status of the R1 and R2 devices after performing SRDF failover operation?
A. R1 and R2 Not Ready
B. R1 Wnte Disabled; R2 Read/Wnte
C. R1 Read/Wnte, R2 Read/Wnte
D. R1 Read/Wnte. R2 Wnte Disabled
Answer: Bhttp://www.scribd.com/doc/29541661/Srdf-Operations-white-Paper

NO.3 Open Replicator pull will be used to move data between a third party array and a Symmetrix V-Max
array.
What is recommended before starting the Open Replicator session?
A. Ensure that the remote devices are Host read/write enabled
B. Ensure that the control devices are Not Ready
C. Ensure that the remote devices are Host inaccessible
D. Ensure that the control devices are Write Disabled
Answer: C

certification EMC   E20-335   certification E20-335   certification E20-335

NO.4 Diagnostic messaging for the GNS daemon is written to which file?
A. /7SYMAPI/emc/storgnsd .log0
B. /SYMAPI/log/storgnsd.log0
C. /SYMAPl/usr/storgnsd log0
D. /SYMAPl/bin/storgnsd log0
Answer: B

EMC examen   E20-335   E20-335 examen

NO.5 What is recommended before creating a TimeFinder/Mirror replica?
A. Ensure that the production application using the source devices is shut down
B. Ensure that all writes from the production application using the source devices are paused!
C. Ensure that the BCVs are not being actively accessed
D. Set the BCVs to a Not Ready state
Answer: Chttp://www.scribd.com/doc/37352326/Emc-Study-2

NO.6 Refer to the exhibit.
A database server has its logs stored on a volume on the log source Symmetrix V-Max array and its data
stored on a volume on the data source Symmetrix V-Max array. Both source Symmetrix V-Max array
frames replicate data to the target Symmetrix V-Max array at the Remote site. There are two device
groups that have been defined:
One group for the data volume on the Symmetrix containing the data LUNs
One group for the log volume on the Symmetrix containing the log LUNS
What happens if the SRDF inks between the Symmetrix contain the data LUNs and the target Symmetrix
were to fail?
A. The R2 data in the database remains consistent because Enginuity Consistency Assist (RDFECAJ
technology would ensure data consistency).
B. The data in the database becomes inconsistent at the Remote site.
C. An SRDF failover would be initiated on all volumes and processing will automatically be switched over
to the Remote site
D. The R2 volumes in the Symmetrix V-Max containing the log LUNs would become write-disabled to the
database server
Answer: C

certification EMC   E20-335 examen   E20-335   certification E20-335

NO.7 You have been asked to create a configuration for a single engine Symmetric V-Max array with 8 DAEs
and 64 drivers. They would like to have the data devices with RAID 5(7+1) protection.
What would be the largest number of members you would recommend for a stripped metavolume.?
A. 4
B. 16
C. 8
D. 32
Answer: B

certification EMC   E20-335   certification E20-335   E20-335   E20-335 examen

NO.8 In symmetric V-max series array running Enginuity 5874, which device is used as a pass-through
device for Auto provisioning?
A. VDEV
B. VCM
C. ACLX
D. SFS
Answer: C

EMC   E20-335   E20-335 examen   E20-335 examen

NO.9 On the Symmetrix platform, which type of RAID protection ensures the best random write performance?
A. RAID 1
B. RAID S
C. RAID 6
D. RAID 5
Answer: A

EMC   E20-335   E20-335   E20-335

NO.10 One of the requirements, during an Open Replicator implementation is that production application
should not be implemented by open Replication session. An analysis of the control Symmetrix showed
that FA ports are currently 70% utilized. How should pace and ceiling be configured?
A. Pace should be set to 0 and Ceiling should be left at the default
B. Pace should be left at the default and Ceiling set to 30
C. Pace should be left at the default and Ceiling set to 100
D. Pace should be set to 9 and Ceiling should be set to 70
Answer: B

certification EMC   E20-335   E20-335   E20-335

NO.11 How does Delta Set Extension help in an SRDF/A deployment?
A. Reduces RPO
B. Reduces the amount of required cache
C. Improves response time
D. Absorbs bursts of host writes
Answer: D

EMC   E20-335   E20-335   E20-335

NO.12 Which file contains the parameter that can change the default behavior of SYMCLI operations, and
there control actions?
A. SYMCLI options File
B. SYMAPI Options File
C. SYMCLI Command File
D. SYMAPI Command File
Answer: B

EMC examen   certification E20-335   certification E20-335   E20-335

NO.13 Where is the volume Logix Database maintained starting with DMX-3?
A. VCM gatekeeper
B. Symmetrix logical Volume
C. Symmetrix File System
D. VCM database.
Answer: C

EMC examen   E20-335   certification E20-335   E20-335   E20-335

NO.14 What is required to ensure the integrity of data on the R2 volume during a SRDF fallback operation?
A. Remove entries from the file system table
B. Stop any applications that are accessing the R2 volume
C. Disable journaling on the file system
D. Suspend the RDF link
Answer: B

EMC   E20-335   certification E20-335

NO.15 Refer to the exhibit
What is the correct state for the Standard and Rl-BCV prior to issuing a symreplicate start command?
A. Synchronized
B. Suspended
C. Split
D. Write-Enable
Answer: C

EMC   E20-335 examen   E20-335   E20-335   E20-335

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

没有评论:

发表评论