Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test EMC E20-538 à se preuver. Mais le taux du succès et bien bas. Participer le test EMC E20-538 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification EMC E20-538. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test EMC E20-538.
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test EMC E20-538, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test EMC E20-538 coûtant un peu d'argent.
Code d'Examen: E20-538
Nom d'Examen: EMC (Network Attached Storage (NAS) Specialist Exam for Storage Administrators)
Questions et réponses: 115 Q&As
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Le test EMC E20-538 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test EMC E20-538. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.
E20-538 Démo gratuit à télécharger: http://www.pass4test.fr/E20-538.html
NO.1 Which command would successfully extend a Data Mover root file system?
A. as root issue /nas/sbin/rootnas_fs -xtend root_fs_2 size=2G pool=clar_r5_performance
B. as nasadmin issue nas_fs -xtend root_fs_2 size=2G pool=clar_r5_performance
C. as root issue /nas/sbin/rootnas_fs -xtend root_fs_2 size=2K pool=clar_r5_performance
D. as nasadmin issue nas_fs -xtend root_fs_2 size=2G pool=clar_r5_performance
Answer: A
certification EMC E20-538 E20-538 E20-538
NO.2 You are running out of capacity on your Celerra, and additional storage is already on order. Meanwhile,
which quota configuration would track user consumption?
A. User quotas on the file system
B. Group quotas on the tree
C. Tree quotas on the file system
D. User quotas on the tree
Answer: A
EMC certification E20-538 E20-538
NO.3 An administrator configured Data Mover network devices to transmit frames on all links for redundancy.
Which network configuration was used to accomplish this.?
A. LACP
B. Proxy ARP
C. Ethernet channel
D. RARP
Answer: A
EMC examen certification E20-538 E20-538 examen E20-538
NO.4 Which statement describes the public network connection of a Celerra with a single Control Station?
A. Comprised of a single physical Ethernet connection
B. Is formed from dual redundant physical Ethernet connections
C. Comprised of a virtual Ethernet EtherChannel connection
D. Is formed from a virtual Ethernet LACP connection
Answer: A
EMC E20-538 examen E20-538
NO.5 You enter the following command: nas_fs -create size=3M pool=clar_r5_economy
What will be the result?
A. The file system is created with a default file system name.
B. The file system and a mountpoint are created.
C. Only the mountpoint is created.
D. The file system is not created.
Answer: A
EMC E20-538 examen E20-538 examen
NO.6 Management asks you to set quota limits on a directory tree.
They want the default set to 500 MB with a possible overhead of 20%. They want to enforce these limits
on the sum of the logical size of objects in that quota tree. What is part of the correct answer?
A. Set the hard limit to 600 MB, and set the file size quota policy on the Data Mover.
B. Set the hard limit to 600 MB, and set the file size quota policy on the file system.
C. Set the hard limit to 500 MB, and set the file size quota policy on the file system.
D. Set the hard limit to 500 MB, and set the blocksize quota policy.
Answer: A
EMC E20-538 examen E20-538
NO.7 A network administrator needs to create a trunk on a Data Mover from dissimilar physical network
devices.
What networking configuration should be used to accomplish this?
A. LACP
B. Fail Safe Network
C. EtherChannel
D. SNMP
Answer: C
EMC examen E20-538 examen E20-538 certification E20-538
NO.8 When a Celerra quota is turned off, how does that affect the existing user and group quota information?
A. User and group quota statistics are deleted.
B. Group statistics are retained and user statistics are not.
C. User and group statistics are retained.
D. User statistics are retained and group statistics are not.
Answer: C
certification EMC E20-538 certification E20-538 E20-538 examen E20-538 E20-538 examen
NO.9 What is a minimum requirement when creating a file system using Manual Volume Management?
A. Metavolume
B. Mirror volume
C. Sliced volumes
D. Striped volumes
Answer: A
EMC examen certification E20-538 certification E20-538 E20-538 examen
NO.10 You are creating an auto-extend file system. What would happen if you leave the Maximum Capacity
option empty?
A. File system would grow to the pool capacity limit.
B. Data would be overwritten.
C. File system would fail to auto-extend.
D. Write I/Os would be saved in cache until more space is added.
Answer: A
EMC certification E20-538 E20-538 E20-538 E20-538
NO.11 A system administrator is trying to create a non-root file system of type UxFS, on a metavolume. What is
the minimum size to create the file system?
A. 4 GB
B. 1 MB
C. 2 GB
D. 2 MB
Answer: D
EMC examen E20-538 examen E20-538
NO.12 A site administrator would like to have file system quota implemented. However, the administrator is
worried about users who create symbolic links.
How can symbolic links be excluded from the file system quota?
A. Use group and user quotas together
B. Use the filesize policy
C. Use the block policy
D. Use the excl option when configuring the quota
Answer: B
certification EMC certification E20-538 E20-538 E20-538
NO.13 Which conditions must be met before tree quotas can be enabled?
A. File system and parent directories must exist, but the parent directory on which the tree quota is to be
applied must already exist.
B. File system and parent directories must exist, but the parent directory on which the tree quota is to be
applied must not exist.
C. Tree directory structure to be quoted must be populated with data.
D. Tree directory structure to be quoted must be at the root of the file system.
Answer: B
EMC examen E20-538 E20-538 E20-538
NO.14 You are asked by management to create a project directory and track the individual user consumption
in this directory using Celerra quota features. No limits should be enforced.
What would be part of an appropriate procedure to satisfy this requirement?
A. Set up a user quota on the share; specify the limits with the keyword "none" in the CLI
B. Set up a tree quota on the new directory; set up a user quota on the quota tree; specify the limits for the
tree quota and user quota with a value of zero in the GUI
C. Set up a tree quota on the new directory; leave the two fields specifying the limits for the quota tree and
the user quota blank in the Unisphere GUI
D. Set up a user quota on the file system (accommodating the new directory); specify the limits with the
keyword "none" in the GUI
Answer: C
EMC certification E20-538 E20-538 E20-538
NO.15 A site administrator needs to disable user and group quotas. What happens to the existing quota
configuration and metadata?
A. Maintained
B. Enforced
C. Deleted
D. Reset
Answer: A
EMC E20-538 E20-538 examen E20-538 examen E20-538 E20-538 examen
Le test Certificat EMC E20-538 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification EMC E20-538. Vous allez prendre toutes essences du test EMC E20-538 dans une courte terme.
没有评论:
发表评论