Extreme Networks EW0-200, de formation et d'essai

Le produit de Pass4Test peut assurer les candidats à réussir le test Extreme Networks EW0-200 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Vous Extreme Networks EW0-200 pouvez télécharger le démo Extreme Networks EW0-200 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.

Vous aurez une assurance 100% à réussir le test Extreme Networks EW0-200 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Code d'Examen: EW0-200
Nom d'Examen: Extreme Networks (Extreme networks associate(ena))
Questions et réponses: 240 Q&As

Le test Extreme Networks EW0-200 est l'un très improtant dans tous les tests de Certification Extreme Networks, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

EW0-200 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-200.html

NO.1 This type of OSPF router has its router interfaces connected into multiple OSPF areas.
A. ASBR.
B. ABR.
C. DR.
D. BDR.
Answer: B

Extreme Networks   EW0-200   EW0-200   EW0-200

NO.2 Which CLI command would you use to configure the switch to ignore STP for selected VLANs?
A. enable ignore-stp vlan <stpd>
B. enable ignore-bpdu stpd <stpd> vlan <vlan>
C. enable ignore-bpdu stpd <stpd>
D. enable ignore-stp vlan <vlan>
Answer: D

Extreme Networks examen   certification EW0-200   EW0-200

NO.3 Which CLI command will you use to change the CLI prompt from the default display to Switch02?
A. CONFIG SNMP SYSLOCATION Switch02
B. CONFIG SNMP SYSNAME Switch02
C. CONFIG CLI PROMPT Switch02
D. CONFIG CLI DISPLAY Switch02
Answer: B

Extreme Networks   EW0-200 examen   EW0-200 examen

NO.4 In ExtremeWare, active VLANs that are configured with ports and an IP address and configured to
forward IP and run a routing protocol will have their subnet advertised.
A. TRUE
B. FALSE
Answer:A

Extreme Networks   EW0-200   EW0-200 examen   certification EW0-200   EW0-200 examen

NO.5 The default administrator login name for a new Extreme switch was entered as ADMIN (all caps). This
will allow the administrator access to the CLI.
A. TRUE
B. FALSE
Answer: B

Extreme Networks examen   EW0-200   EW0-200   EW0-200   EW0-200 examen   EW0-200

NO.6 A 802.1Q tag is a marker inserted between the source and destination MAC addresses fields of the
Ethernet frame.
A. TRUE
B. FALSE
Answer: B

Extreme Networks   EW0-200   EW0-200 examen   EW0-200

NO.7 Extreme Networks switches build their forwarding database from the incoming packet field information
containing the:
A. Source MAC address.
B. Destination MAC address.
C. Source IP address.
D. Destination IP address.
Answer:A

certification Extreme Networks   EW0-200   certification EW0-200   EW0-200   certification EW0-200

NO.8 How would you stop a scheduled configuration download from happening? Use the CLI command:
A. cancel configuration download
B. download configuration cancel
C. configuration download cancel
D. delete configuration download
Answer: B

Extreme Networks   certification EW0-200   EW0-200   certification EW0-200

NO.9 ExtremeWare, pre-installed on every Extreme Networks ?chipset switch, combines industry standard
protocols to ensure interoperability with legacy switches and routers, QoS for bandwidth management
and traffic prioritization in today networks.
A. TRUE
B. FALSE
Answer:A

Extreme Networks   EW0-200 examen   EW0-200   EW0-200   certification EW0-200

NO.10 An Extreme Switch is shipped with a pre-configured VLAN called DEFAULT that has all switch ports as
tagged members.
A. TRUE
B. FALSE
Answer: B

Extreme Networks   EW0-200 examen   certification EW0-200   EW0-200 examen

NO.11 Which of the following CLI commands would you use to enable ECMP for RIP?
A. enable rip route sharing
B. enable route sharing rip
C. enable iproute sharing
D. None of these, ecmp is not supported by RIP
Answer: D

Extreme Networks   certification EW0-200   EW0-200   EW0-200

NO.12 Given the following information, select the option that would allow you to change the active
ExtremeWare version to 6.1.9b11 upon reboot.
A. use image primary
B. download config primary
C. use config primary
D. download image primary
Answer:A

certification Extreme Networks   EW0-200 examen   EW0-200   EW0-200

NO.13 What CLI command is used to disable learning of incoming RIP routes on an interface?
A. disable rip learning <VLAN>
B. configure rip rxmode none <VLAN>
C. configure rip interface <VLAN> passive
D. None of these
Answer: B

Extreme Networks   certification EW0-200   EW0-200   EW0-200

NO.14 The CLI console port utilizes a serial cable for physical switch to terminal connection.
A. TRUE
B. FALSE
Answer:A

certification Extreme Networks   certification EW0-200   EW0-200   certification EW0-200   certification EW0-200

NO.15 If you wish to silently drop all traffic destined for IP network 100.219.10.0/24 with a gateway of
10.219.10.1/24 and without receiving any ICMP messages that would otherwise be generated, which CLI
command would you execute?
A. configure iproute delete 100.219.10.0/24 gateway 10.219.10.1
B. configure iproute default 100.219.10.0/24
C. configure iproute add blackhole 100.219.10.0/24 gateway 10.219.10.1
D. configure iproute add blackhole 100.219.10.0/24
Answer: D

Extreme Networks examen   EW0-200 examen   certification EW0-200   certification EW0-200

NO.16 Which CLI command would you use to create a default route with a metric of 5 and a gateway of
10.0.0.1?
A. CONFIG IPROUTE ADD DEFAULT 10.0.0.1 5
B. CONFIG IPROUTE ADD DEFAULT 5 10.0.0.1
C. CREATE IPROUTE ADD DEFAULT 10.0.0.1 5
D. CREATE IPROUTE ADD DEFAULT 5 10.0.0.1
Answer:A

Extreme Networks   EW0-200 examen   EW0-200 examen   EW0-200   EW0-200

NO.17 Which of the following protocol filter/s is/are predefined in ExtremeWare?
A. OSPF
B. TCP
C. NETBIOS
D. All of these
Answer: C

certification Extreme Networks   EW0-200   EW0-200 examen   EW0-200

NO.18 Which step would you take to configure a VLAN to only allow IP-related traffic?
A. config <vlan> protocol ip
B. config protocol <vlan> ip
C. config ip protocol <vlan>
D. None of these.
Answer:A

Extreme Networks examen   EW0-200   EW0-200

NO.19 In spanning tree, the designated bridge is the bridge with the:
A. least-cost path to the root bridge
B. highest bridge priority
C. lowest port cost on all ports
D. None of these
Answer:A

Extreme Networks   EW0-200 examen   certification EW0-200

NO.20 Which statement is true? In a PC, the configured default gateway:
A. Is always within the PC IP (sub) network.
B. Is always outside the PC IP (sub) network.
C. Is always behind a router.
D. Can be anywhere.
Answer:A

Extreme Networks   certification EW0-200   certification EW0-200   certification EW0-200

Finalement, la Q&A Extreme Networks EW0-200 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Extreme Networks EW0-200 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Extreme Networks, vous aurez un meilleur salaire et une plus grande space à se développer.