显示标签为“Extreme Networks”的博文。显示所有博文
显示标签为“Extreme Networks”的博文。显示所有博文

2013年12月5日星期四

Extreme Networks EW0-200, de formation et d'essai

Le produit de Pass4Test peut assurer les candidats à réussir le test Extreme Networks EW0-200 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Vous Extreme Networks EW0-200 pouvez télécharger le démo Extreme Networks EW0-200 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.

Vous aurez une assurance 100% à réussir le test Extreme Networks EW0-200 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Code d'Examen: EW0-200
Nom d'Examen: Extreme Networks (Extreme networks associate(ena))
Questions et réponses: 240 Q&As

Le test Extreme Networks EW0-200 est l'un très improtant dans tous les tests de Certification Extreme Networks, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

EW0-200 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-200.html

NO.1 This type of OSPF router has its router interfaces connected into multiple OSPF areas.
A. ASBR.
B. ABR.
C. DR.
D. BDR.
Answer: B

Extreme Networks   EW0-200   EW0-200   EW0-200

NO.2 Which CLI command would you use to configure the switch to ignore STP for selected VLANs?
A. enable ignore-stp vlan <stpd>
B. enable ignore-bpdu stpd <stpd> vlan <vlan>
C. enable ignore-bpdu stpd <stpd>
D. enable ignore-stp vlan <vlan>
Answer: D

Extreme Networks examen   certification EW0-200   EW0-200

NO.3 Which CLI command will you use to change the CLI prompt from the default display to Switch02?
A. CONFIG SNMP SYSLOCATION Switch02
B. CONFIG SNMP SYSNAME Switch02
C. CONFIG CLI PROMPT Switch02
D. CONFIG CLI DISPLAY Switch02
Answer: B

Extreme Networks   EW0-200 examen   EW0-200 examen

NO.4 In ExtremeWare, active VLANs that are configured with ports and an IP address and configured to
forward IP and run a routing protocol will have their subnet advertised.
A. TRUE
B. FALSE
Answer:A

Extreme Networks   EW0-200   EW0-200 examen   certification EW0-200   EW0-200 examen

NO.5 The default administrator login name for a new Extreme switch was entered as ADMIN (all caps). This
will allow the administrator access to the CLI.
A. TRUE
B. FALSE
Answer: B

Extreme Networks examen   EW0-200   EW0-200   EW0-200   EW0-200 examen   EW0-200

NO.6 A 802.1Q tag is a marker inserted between the source and destination MAC addresses fields of the
Ethernet frame.
A. TRUE
B. FALSE
Answer: B

Extreme Networks   EW0-200   EW0-200 examen   EW0-200

NO.7 Extreme Networks switches build their forwarding database from the incoming packet field information
containing the:
A. Source MAC address.
B. Destination MAC address.
C. Source IP address.
D. Destination IP address.
Answer:A

certification Extreme Networks   EW0-200   certification EW0-200   EW0-200   certification EW0-200

NO.8 How would you stop a scheduled configuration download from happening? Use the CLI command:
A. cancel configuration download
B. download configuration cancel
C. configuration download cancel
D. delete configuration download
Answer: B

Extreme Networks   certification EW0-200   EW0-200   certification EW0-200

NO.9 ExtremeWare, pre-installed on every Extreme Networks ?chipset switch, combines industry standard
protocols to ensure interoperability with legacy switches and routers, QoS for bandwidth management
and traffic prioritization in today networks.
A. TRUE
B. FALSE
Answer:A

Extreme Networks   EW0-200 examen   EW0-200   EW0-200   certification EW0-200

NO.10 An Extreme Switch is shipped with a pre-configured VLAN called DEFAULT that has all switch ports as
tagged members.
A. TRUE
B. FALSE
Answer: B

Extreme Networks   EW0-200 examen   certification EW0-200   EW0-200 examen

NO.11 Which of the following CLI commands would you use to enable ECMP for RIP?
A. enable rip route sharing
B. enable route sharing rip
C. enable iproute sharing
D. None of these, ecmp is not supported by RIP
Answer: D

Extreme Networks   certification EW0-200   EW0-200   EW0-200

NO.12 Given the following information, select the option that would allow you to change the active
ExtremeWare version to 6.1.9b11 upon reboot.
A. use image primary
B. download config primary
C. use config primary
D. download image primary
Answer:A

certification Extreme Networks   EW0-200 examen   EW0-200   EW0-200

NO.13 What CLI command is used to disable learning of incoming RIP routes on an interface?
A. disable rip learning <VLAN>
B. configure rip rxmode none <VLAN>
C. configure rip interface <VLAN> passive
D. None of these
Answer: B

Extreme Networks   certification EW0-200   EW0-200   EW0-200

NO.14 The CLI console port utilizes a serial cable for physical switch to terminal connection.
A. TRUE
B. FALSE
Answer:A

certification Extreme Networks   certification EW0-200   EW0-200   certification EW0-200   certification EW0-200

NO.15 If you wish to silently drop all traffic destined for IP network 100.219.10.0/24 with a gateway of
10.219.10.1/24 and without receiving any ICMP messages that would otherwise be generated, which CLI
command would you execute?
A. configure iproute delete 100.219.10.0/24 gateway 10.219.10.1
B. configure iproute default 100.219.10.0/24
C. configure iproute add blackhole 100.219.10.0/24 gateway 10.219.10.1
D. configure iproute add blackhole 100.219.10.0/24
Answer: D

Extreme Networks examen   EW0-200 examen   certification EW0-200   certification EW0-200

NO.16 Which CLI command would you use to create a default route with a metric of 5 and a gateway of
10.0.0.1?
A. CONFIG IPROUTE ADD DEFAULT 10.0.0.1 5
B. CONFIG IPROUTE ADD DEFAULT 5 10.0.0.1
C. CREATE IPROUTE ADD DEFAULT 10.0.0.1 5
D. CREATE IPROUTE ADD DEFAULT 5 10.0.0.1
Answer:A

Extreme Networks   EW0-200 examen   EW0-200 examen   EW0-200   EW0-200

NO.17 Which of the following protocol filter/s is/are predefined in ExtremeWare?
A. OSPF
B. TCP
C. NETBIOS
D. All of these
Answer: C

certification Extreme Networks   EW0-200   EW0-200 examen   EW0-200

NO.18 Which step would you take to configure a VLAN to only allow IP-related traffic?
A. config <vlan> protocol ip
B. config protocol <vlan> ip
C. config ip protocol <vlan>
D. None of these.
Answer:A

Extreme Networks examen   EW0-200   EW0-200

NO.19 In spanning tree, the designated bridge is the bridge with the:
A. least-cost path to the root bridge
B. highest bridge priority
C. lowest port cost on all ports
D. None of these
Answer:A

Extreme Networks   EW0-200 examen   certification EW0-200

NO.20 Which statement is true? In a PC, the configured default gateway:
A. Is always within the PC IP (sub) network.
B. Is always outside the PC IP (sub) network.
C. Is always behind a router.
D. Can be anywhere.
Answer:A

Extreme Networks   certification EW0-200   certification EW0-200   certification EW0-200

Finalement, la Q&A Extreme Networks EW0-200 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Extreme Networks EW0-200 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Extreme Networks, vous aurez un meilleur salaire et une plus grande space à se développer.

2013年11月21日星期四

Le plus récent matériel de formation examen Extreme Networks EW0-200 de certification

On doit faire un bon choix pour passer le test Extreme Networks EW0-200. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Extreme Networks EW0-200 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Le test Extreme Networks EW0-200 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.

Pass4Test peut offrir nombreux de documentations aux candidats de test Extreme Networks EW0-200, et aider les candidats à réussir le test. Les marétiaux visés au test Extreme Networks EW0-200 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Extreme Networks EW0-200 100%.

C'est sûr que le Certificat Extreme Networks EW0-200 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Extreme Networks EW0-200, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Extreme Networks EW0-200 peut bien tester la professionnalité de IT.

Certification Extreme Networks EW0-200 est un des tests plus importants dans le système de Certification Extreme Networks. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Extreme Networks EW0-200 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.

Code d'Examen: EW0-200
Nom d'Examen: Extreme Networks (Extreme networks associate(ena))
Questions et réponses: 240 Q&As

EW0-200 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-200.html

NO.1 What CLI command is used to disable learning of incoming RIP routes on an interface?
A. disable rip learning <VLAN>
B. configure rip rxmode none <VLAN>
C. configure rip interface <VLAN> passive
D. None of these
Answer: B

certification Extreme Networks   EW0-200 examen   EW0-200

NO.2 Which CLI command would you use to configure the switch to ignore STP for selected VLANs?
A. enable ignore-stp vlan <stpd>
B. enable ignore-bpdu stpd <stpd> vlan <vlan>
C. enable ignore-bpdu stpd <stpd>
D. enable ignore-stp vlan <vlan>
Answer: D

Extreme Networks   EW0-200   EW0-200   EW0-200 examen

NO.3 Which of the following CLI commands would you use to enable ECMP for RIP?
A. enable rip route sharing
B. enable route sharing rip
C. enable iproute sharing
D. None of these, ecmp is not supported by RIP
Answer: D

Extreme Networks   EW0-200   certification EW0-200

NO.4 The CLI console port utilizes a serial cable for physical switch to terminal connection.
A. TRUE
B. FALSE
Answer:A

Extreme Networks   certification EW0-200   EW0-200

NO.5 Which of the following protocol filter/s is/are predefined in ExtremeWare?
A. OSPF
B. TCP
C. NETBIOS
D. All of these
Answer: C

Extreme Networks   EW0-200   EW0-200   EW0-200 examen   certification EW0-200

NO.6 Which CLI command will you use to change the CLI prompt from the default display to Switch02?
A. CONFIG SNMP SYSLOCATION Switch02
B. CONFIG SNMP SYSNAME Switch02
C. CONFIG CLI PROMPT Switch02
D. CONFIG CLI DISPLAY Switch02
Answer: B

Extreme Networks examen   EW0-200   EW0-200   certification EW0-200

NO.7 The default administrator login name for a new Extreme switch was entered as ADMIN (all caps). This
will allow the administrator access to the CLI.
A. TRUE
B. FALSE
Answer: B

certification Extreme Networks   EW0-200   EW0-200   certification EW0-200   EW0-200

NO.8 Which CLI command would you use to create a default route with a metric of 5 and a gateway of
10.0.0.1?
A. CONFIG IPROUTE ADD DEFAULT 10.0.0.1 5
B. CONFIG IPROUTE ADD DEFAULT 5 10.0.0.1
C. CREATE IPROUTE ADD DEFAULT 10.0.0.1 5
D. CREATE IPROUTE ADD DEFAULT 5 10.0.0.1
Answer:A

Extreme Networks examen   EW0-200   EW0-200   EW0-200

NO.9 An Extreme Switch is shipped with a pre-configured VLAN called DEFAULT that has all switch ports as
tagged members.
A. TRUE
B. FALSE
Answer: B

Extreme Networks examen   EW0-200 examen   EW0-200

NO.10 Given the following information, select the option that would allow you to change the active
ExtremeWare version to 6.1.9b11 upon reboot.
A. use image primary
B. download config primary
C. use config primary
D. download image primary
Answer:A

certification Extreme Networks   certification EW0-200   EW0-200   EW0-200 examen   EW0-200

NO.11 Which step would you take to configure a VLAN to only allow IP-related traffic?
A. config <vlan> protocol ip
B. config protocol <vlan> ip
C. config ip protocol <vlan>
D. None of these.
Answer:A

Extreme Networks examen   EW0-200 examen   EW0-200 examen   certification EW0-200

NO.12 Extreme Networks switches build their forwarding database from the incoming packet field information
containing the:
A. Source MAC address.
B. Destination MAC address.
C. Source IP address.
D. Destination IP address.
Answer:A

certification Extreme Networks   EW0-200   EW0-200   EW0-200

NO.13 In spanning tree, the designated bridge is the bridge with the:
A. least-cost path to the root bridge
B. highest bridge priority
C. lowest port cost on all ports
D. None of these
Answer:A

certification Extreme Networks   certification EW0-200   EW0-200   EW0-200

NO.14 If you wish to silently drop all traffic destined for IP network 100.219.10.0/24 with a gateway of
10.219.10.1/24 and without receiving any ICMP messages that would otherwise be generated, which CLI
command would you execute?
A. configure iproute delete 100.219.10.0/24 gateway 10.219.10.1
B. configure iproute default 100.219.10.0/24
C. configure iproute add blackhole 100.219.10.0/24 gateway 10.219.10.1
D. configure iproute add blackhole 100.219.10.0/24
Answer: D

Extreme Networks examen   certification EW0-200   EW0-200 examen

NO.15 How would you stop a scheduled configuration download from happening? Use the CLI command:
A. cancel configuration download
B. download configuration cancel
C. configuration download cancel
D. delete configuration download
Answer: B

Extreme Networks   certification EW0-200   EW0-200 examen

NO.16 In ExtremeWare, active VLANs that are configured with ports and an IP address and configured to
forward IP and run a routing protocol will have their subnet advertised.
A. TRUE
B. FALSE
Answer:A

Extreme Networks   EW0-200 examen   certification EW0-200

NO.17 This type of OSPF router has its router interfaces connected into multiple OSPF areas.
A. ASBR.
B. ABR.
C. DR.
D. BDR.
Answer: B

Extreme Networks   certification EW0-200   EW0-200 examen   certification EW0-200   EW0-200 examen   EW0-200 examen

NO.18 Which statement is true? In a PC, the configured default gateway:
A. Is always within the PC IP (sub) network.
B. Is always outside the PC IP (sub) network.
C. Is always behind a router.
D. Can be anywhere.
Answer:A

Extreme Networks   certification EW0-200   EW0-200 examen   EW0-200

NO.19 A 802.1Q tag is a marker inserted between the source and destination MAC addresses fields of the
Ethernet frame.
A. TRUE
B. FALSE
Answer: B

Extreme Networks   EW0-200   EW0-200 examen   EW0-200

NO.20 ExtremeWare, pre-installed on every Extreme Networks ?chipset switch, combines industry standard
protocols to ensure interoperability with legacy switches and routers, QoS for bandwidth management
and traffic prioritization in today networks.
A. TRUE
B. FALSE
Answer:A

Extreme Networks   EW0-200 examen   EW0-200 examen   certification EW0-200   EW0-200 examen

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Extreme Networks EW0-200. Les documentations particulièrement visée au test Extreme Networks EW0-200 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Extreme Networks EW0-200.

2013年10月25日星期五

Dernières Extreme Networks EW0-300 de la pratique de l'examen questions et réponses téléchargement gratuit

Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Extreme Networks EW0-300.

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

Pass4Test est un site à offrir particulièrement la Q&A Extreme Networks EW0-300, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Extreme Networks EW0-300, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Extreme Networks EW0-300 et même se renforcer vos connaissances professionnelles IT.

Code d'Examen: EW0-300
Nom d'Examen: Extreme Networks (Extreme Networks Specialist....)
Questions et réponses: 158 Q&As

EW0-300 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-300.html

NO.1 The integrated IS-IS protocol allows for mixing of IP-only,OSI-only, and dual (IP
and OSI) routers.
A. True
B. False
Answer: A

Extreme Networks   EW0-300   EW0-300 examen   certification EW0-300

NO.2 Extreme Ware 7.0 can support which OSPF authentication on a per VLAN basis:
A. MD5
B. Simple-password
C. Encrypted simple-password
D. All of these
Answer: D

certification Extreme Networks   certification EW0-300   EW0-300

NO.3 Which of the following statements fit the description of PIM sparse mode? (choose
three that apply)
A. PIM sparse mode is suitable for network with minimal multicast deployment.
B. PIM sparse mode builds shared trees based on a common Rendez-Vous Point
C. In PIM sparse mode the RPF check depends on the tree type
D. An explicit join is not required in PIM sparse mode.
Answer: A,B,C,D

Extreme Networks examen   EW0-300   EW0-300   EW0-300   EW0-300 examen

NO.4 In Extreme Ware, which one of the following is an optional ESRP configuration
that allows you to connect active hosts directly to an ESRP master or standby
switch.
A. ESRP Groups
B. ESRP Domain
C. ESRP Host Attach
D. None of these
Answer: C

certification Extreme Networks   EW0-300   EW0-300   EW0-300 examen

NO.5 An IP-only IS-IS router (or "IP-only" router) is defined to be
A. A router which uses IS-IS as the routing protocol for IP
B. Does not otherwise support OSI protocols
C. One of the IS-IS router types
D. All of the above
Answer: D

Extreme Networks   EW0-300   EW0-300

NO.6 On an Extreme Networks switch, how many bits comprise an OSPF area ID?
A. 32 BITS
B. 48 BITS
C. 64 BITS
D. 128 BITS
Answer: A

certification Extreme Networks   EW0-300 examen   EW0-300 examen   EW0-300   certification EW0-300   EW0-300 examen

NO.7 Which CLI command configures DVMRP on all IP multicast interfaces.
A. config dvmrp add vlan all
B. config dvmrp add all
C. enable dvmrp
D. enable dvmrp vlan all
Answer: A

Extreme Networks examen   EW0-300   certification EW0-300   EW0-300 examen   EW0-300 examen

NO.8 The following CLI command is valid to advertise SLB virtual servers in OSPF ith a
cost of 10.
Enable ospf export vip cost 10
A. True
B. False
Answer: A

Extreme Networks   EW0-300   EW0-300 examen

NO.9 Extreme Networks IS? Chipset switches allows you to run simultaneously the
Radius and Tacacs+features.
A. True
B. False
Answer: B

Extreme Networks examen   EW0-300   certification EW0-300   EW0-300 examen

NO.10 OSPF requires that all areas attach directly to the backbone area, and that all
attachments are made with a direct physical connection.
A. True
B. False
Answer: B

Extreme Networks   EW0-300   certification EW0-300

NO.11 The maximum number of EAPS domains supported per switch and ring is?
A. 64
B. 32
C. 16
D. 8
Answer: A

Extreme Networks   EW0-300 examen   EW0-300 examen   EW0-300 examen   EW0-300 examen   EW0-300

NO.12 What is the CLI command you would use to configure a VLAN to be protected by
ESRP?
A. enable esrp vlan <vlan>
B. enable esrp vlan <vlan> detail
C. config esrp vlan <vlan>
D. config esrp vlan <vlan> detail
Answer: A

Extreme Networks   EW0-300 examen   certification EW0-300

NO.13 The majority of Extreme Networks switches have a dedicated out of band
management port and VLAN. The 10/100BASE-TX Ethernet management port
allows you to communicate directly to the CPU of the switch. If you want the switch
to forward traffic from the mgmt VLAN to other VLANS you just have to enable
ipforwarding on all VLANS including the management VLAN.
A. TRUE
B. FALSE
Answer: B

Extreme Networks   certification EW0-300   certification EW0-300

NO.14 It is possible to set an STP-threshold to switch from a shared tree to a shortest path
tree. This switch over will be initiated by:
A. The Rendezvous Point
B. The Bootstrap Router
C. A last hop router
D. The router nearest to the source
Answer: C

Extreme Networks examen   EW0-300 examen   EW0-300 examen   EW0-300   EW0-300

NO.15 When limit-learning is configured on a port and the limit is reached the following
traffic still flows to the port.
A. Packets destined for the active Mac addresses
B. Broadcast traffic
C. EDP traffic
D. All of the above
Answer: D

Extreme Networks   EW0-300   EW0-300

NO.16 EAPS protection switching is similar to what can be achieved with the Spanning
Tree Protocol but one of the big advantages of EAPS is:
A. EAPS also supports star topologies
B. EAPS has a recovery time of less than a second in case of link failure.
C. An EAPS domain supports multiple root bridges, thus alternative path
D. EAPS eliminates the need for protocols like ESRP or VRRP that bring default
gateway redundancy.
Answer: B

certification Extreme Networks   EW0-300   EW0-300

NO.17 How does an IGMP router learns about the existence of hosts in multicast groups:
A. By receiving a response on an IGMP membership query
B. By looking into the ARP cache
C. There is no dynamic learning process, instead static FDB entries are used
D. None of the above
Answer: A

Extreme Networks   EW0-300 examen   EW0-300   certification EW0-300

NO.18 Extreme ware 7.0 supports both level1 and level 2 IS-IS routers.
A. TRUE
B. FALSE
Answer: A

certification Extreme Networks   EW0-300   EW0-300   EW0-300

NO.19 The following modes of operation are supported with the Network login feature.
(choose all that apply)
A. Secure mode
B. Campus mode
C. Quick Mode
D. ISP mode
Answer: A,B,C,D

Extreme Networks   EW0-300 examen   certification EW0-300   certification EW0-300

NO.20 In OSPF, the router type that is required to connect an area with another area is
the:
A. Designated Router
B. Back-up Designated Router
C. ASBR
D. ABR
Answer: D

Extreme Networks examen   EW0-300 examen   certification EW0-300

NO.21 According
to accompanying diagram and ACL configuration it is possible to telnet
from host A to any of the switch IP addresses.
A. True
B. False
Answer: B

certification Extreme Networks   certification EW0-300   EW0-300   certification EW0-300   EW0-300 examen

NO.22 ESRP-enabled switches can utilize either an IP address or an IPX net ID for their
protected VLANs.
A. TRUE
B. FALSE
Answer: A

certification Extreme Networks   EW0-300 examen   EW0-300 examen   EW0-300   EW0-300

NO.23 What is the RP-set?
A. It is the information of which RP are available for what Multicast groups.
It is send by the BSR towards all PIM routers
B. It is the information of which multicast groups are active
It is send by the RP towards all PIM routers
C. It is the information of which BSR are available for what Multicast groups.
It is send by RP towards all PIM routers
D. It is the information, stored by all RP, needed to find the BSR,
Answer: A

certification Extreme Networks   certification EW0-300   certification EW0-300

NO.24 An LSP is a link state packet used by which routing protocol?
A. OSPF
B. RIP
C. BGP
D. None of these
Answer: D

Extreme Networks   certification EW0-300   EW0-300 examen   EW0-300   certification EW0-300

NO.25 On a RADIUS server you can distinguish between switch access and Netlogin
authentication. Extreme provides a vendor specific attribute
Extreme:Extreme-Netlogin-only =disabled/enabled.
User authentication for both Netlogin and switch access is allowed when the value is
disabled.
When the value enabled user authentication is restricted to Netlogin only.
A. True
B. False
Answer: A

Extreme Networks examen   EW0-300 examen   EW0-300   EW0-300   EW0-300   EW0-300 examen

NO.26 In SLB, Port Translation Mode is similar to Translation Mode,except that in Port
Translation Mode the physical Port where the node connects to must be configured
as a Fast Ethernet Half Duplex port.
A. True
B. False
Answer: B

Extreme Networks   certification EW0-300   EW0-300

NO.27 In PIM sparse mode the Bootstrap Router election is based on the highest IP
address.
A. True
B. False
Answer: B

certification Extreme Networks   certification EW0-300   EW0-300 examen   EW0-300 examen

NO.28 An Ethernet Automatic Protection Switching (EAPS) domain relies on a control
VLAN.
The ports in that control VLAN ports must be tagged, and participating in the ring
only.
A. True
B. False
Answer: A

Extreme Networks   EW0-300 examen   EW0-300 examen   certification EW0-300

NO.29 How many bits in the IP TOS field does a Summit 48i examine?
A. 4
B. 6
C. 8
D. 16
Answer: B

Extreme Networks   EW0-300 examen   EW0-300 examen   certification EW0-300

NO.30 Exhibit:
According to accompanying diagram and ACL configuration it is possible for Host
A (10.10.10.100) and Host C (30.30.30.100) to successfully communicate.
A. TRUE
B. FALSE
Answer: A

certification Extreme Networks   EW0-300   EW0-300   EW0-300

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Extreme Networks EW0-300 très tôt. Pass4Test peut vous permettre à réussir 100% le test Extreme Networks EW0-300, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

2013年8月4日星期日

Le plus récent matériel de formation Extreme Networks EW0-100

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Extreme Networks EW0-100 à la première fois.


Le produit de Pass4Test peut assurer les candidats à réussir le test Extreme Networks EW0-100 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.


Pass4Test a de formations plus nouvelles pour le test Extreme Networks EW0-100. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Extreme Networks EW0-100 à tous les candidats qui nous choisissent. L'importance de Certification Extreme Networks EW0-100 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.


Code d'Examen: EW0-100

Nom d'Examen: Extreme Networks (Extreme Networks Associate (ENA) )

Questions et réponses: 241 Q&As

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Extreme Networks EW0-100. Le guide d'étude de Pass4Test comprend les excercices de Extreme Networks EW0-100 et la Q&A qui peut vous permetrre à réussir 100% le test Extreme Networks EW0-100. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.


EW0-100 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-100.html


NO.1 How would you change the password for John Doe's management account?
A. Enter config jdoe and then enter the new password twice.
B. Enter config jdoe user account and then enter the new password twice.
C. Enter config user account jdoe and then enter the new password twice.
D. Enter config account jdoe and then enter the new password twice.
Answer: D

Extreme Networks   EW0-100   EW0-100   EW0-100

NO.2 If a packet to be forwarded does not match existing flow information in the ASIC
route cache, the packet is queued to the __________ for route processing.
Answer: cpu

certification Extreme Networks   certification EW0-100   EW0-100 examen

NO.3 What is the default STP forward delay value?
A. 2 seconds
B. 10 seconds
C. 15 seconds
D. 20 seconds
Answer: C

certification Extreme Networks   EW0-100   EW0-100 examen   EW0-100 examen   EW0-100 examen   EW0-100

NO.4 Name a relative route priority that cannot be altered? __________.
Answer: direct

Extreme Networks   EW0-100 examen   certification EW0-100   certification EW0-100

NO.5 Given router interfaces 10.0.0.1/24, 10.10.10.10/24, 192.168.0.1/24, and
192.168.255.254/24 on a Summit7i switch what will be the OSPF router ID given the
following command: config ospf routerid automatic?
A. 10.0.0.1/24
B. 10.10.10.10/24
C. 192.168.0.1/24
D. 192.168.255.254/24
Answer: D

Extreme Networks   EW0-100   EW0-100   certification EW0-100

NO.6 Exhibit:
Given this display, how would you find information similar to the SHOW SWITCH
command?
A. Click on STATISTICS, then SHOW, then SWITCH.
B. Click on STATISTICS, then SWITCH, then SHOW.
C. Click on STATISTICS, then SHOW.
D. Click on STATISTICS, then SWITCH.
Answer: D

certification Extreme Networks   certification EW0-100   EW0-100 examen   EW0-100

NO.7 What is the default value for the RIP garbagetime setting?
A. 30 seconds
B. 60 seconds
C. 120 seconds
D. 180 seconds
Answer: C

certification Extreme Networks   EW0-100 examen   EW0-100   EW0-100 examen   EW0-100

NO.8 What is the minimum ExtremeWare software version that supports the Summit48i?
A. ExtremeWare 4.x
B. ExtremeWare 5.x
C. ExtremeWare 6.x
D. None of the above
Answer: C

Extreme Networks examen   certification EW0-100   certification EW0-100   EW0-100

NO.9 All OSPF routers in the same area must have the same LSDB.
A. True
B. False
Answer: A

certification Extreme Networks   EW0-100   EW0-100   EW0-100   EW0-100

NO.10 Internal routers within an OSPF area are either DRs, BDRs, or __________.
Answer: ODR

Extreme Networks   EW0-100   EW0-100 examen   certification EW0-100

NO.11 SNMP access to ExtremeWare can be limited by the following methods:
A. Use an access list
B. Use an access profile
C. Use the disable snmp access command
D. None of these
Answer: ABC

Extreme Networks   EW0-100   EW0-100   EW0-100   EW0-100 examen

NO.12 RIP version 2 uses a composite metric that includes link speed and delay.
A. True
B. False
Answer: B

Extreme Networks examen   EW0-100 examen   EW0-100   EW0-100   EW0-100 examen

NO.13 Which RIP settings are enabled by default?
A. Triggered updates
B. Poison Reverse
C. Split Horizon
D. Route redistribution
Answer: ABC

Extreme Networks examen   EW0-100 examen   EW0-100 examen   EW0-100 examen   EW0-100

NO.14 __________ allow(s) multiple VLANs to be controlled by a single ESRP instance.
A. ESRP domains
B. ESRP groups
C. ESRP host-attach
D. None of these.
Answer: A

Extreme Networks   certification EW0-100   EW0-100   EW0-100

NO.15 STPDs s0, s1, and s2 have been created. How would you activate only s1 while
leaving the other STPDs inactive?
A. enable stpd s1
B. enable s1 stpd
C. enable stp ¨¤ enable s1 stpd
D. None of these
Answer: A

Extreme Networks   certification EW0-100   EW0-100 examen   EW0-100

NO.16 VLAN aggregation allows multiple sub-VLANs to share a single IP subnet.
A. True
B. False
Answer: A

Extreme Networks   EW0-100   EW0-100   certification EW0-100   EW0-100 examen

NO.17 QoS policy is applied _____ in an Extreme switch.
A. per port
B. per queue, per port
C. per queue
D. None of these.
Answer: B

certification Extreme Networks   EW0-100 examen   EW0-100

NO.18 How do you disable Split Horizon?
A. disable rip splithorizon noadvertise
B. unconfig rip splithorizon
C. disable rip splithorizon
D. unconfig rip splithorizon noadvertise
Answer: C

certification Extreme Networks   EW0-100   EW0-100   EW0-100

NO.19 Unlike VRRP, the Extreme Standby Router Protocol provides redundancy at both
the data link and network layers.
A. True
B. False
Answer: A

Extreme Networks   certification EW0-100   EW0-100   EW0-100

NO.20 Which of the following routes will be used to forward a frame to 192.168.1.174?
A. 192.168.1.0/29
B. 192.168.1.128/30
C. 192.168.1.128/25
D. None of these.
Answer: C

Extreme Networks   EW0-100   EW0-100 examen   EW0-100 examen   EW0-100 examen

NO.21 In RIP, poison reverse means that:
A. A route is not advertised to the interface from which it was learned.
B. A route is advertised as unreachable to the interface from which it was learned.
C. Traffic whose source interface does not match the routing table is blackholed.
D. None of these.
Answer: B

certification Extreme Networks   certification EW0-100   EW0-100 examen   EW0-100 examen   EW0-100

NO.22 Without QoS, all packets are allowed equal access to an egress port.
A. True
B. False
Answer: A

Extreme Networks   EW0-100 examen   EW0-100   EW0-100   EW0-100 examen

NO.23 Which command would you use to configure VLAN CORPORATE (tag 100) with
ports 1:1 through 4:8 tagged and ports 5:1 through 8:8 as untagged?
A. config vlan corporate ports add 1:1-4:8 tagged ¨¤ config vlan corporate ports add
5:1-8:8 untagged
B. config vlan corporate add ports1:1-4:8 tagged ¨¤ config vlan corporate add ports
5:1-8:8 untagged
C. config corporate vlan add ports 1:1-4-8 tagged ¨¤ config corporate vlan add ports
5:1-8:8 untagged
D. config corporate vlan ports add 1:1-4:8 tagged ¨¤ config corporate vlan ports add
5:1:8:8 untagged
Answer: B

Extreme Networks   certification EW0-100   EW0-100   EW0-100   EW0-100   certification EW0-100

NO.24 Extreme Networks "I" series switches have this many queues per port. __________.
Answer: 8

NO.25 A VLAN can be a member of up to 64 STPDs.
A. True
B. False
Answer: B

Extreme Networks   EW0-100   EW0-100

NO.26 What type of area is used to limit external routes?
A. Stub area
B. Normal area
C. Backbone area
D. None of these
Answer: A

Extreme Networks   certification EW0-100   EW0-100   EW0-100

NO.27 Which ExtremeWare feature permits ESRP to increase the number of protected
VLANs by placing them under the control of a master VLAN?
A. ESRP groups
B. ESRP domains
C. ESRP host attach
D. None of these.
Answer: B

Extreme Networks examen   certification EW0-100   certification EW0-100   EW0-100 examen

NO.28 Which command would you use to configure VLAN corporate with IP address
192.168.0.1/16?
A. config vlan corporate ipaddress 192.168.0.1/16
B. config ipaddress corporate vlan 192.168.0.1/16
C. config ipaddress 192.168.0.1/16 vlan corporate
D. config ipaddress 192.168.0.1/16 corporate vlan
Answer: A

certification Extreme Networks   EW0-100   EW0-100   EW0-100

NO.29 Which of the following is not advertised in an OSPF Link State Advertisement?
A. Costs
B. Link utilization
C. Router interfaces
D. Neighbor information
Answer: B

Extreme Networks   EW0-100   EW0-100   certification EW0-100

NO.30 When using Spanning Tree Protocol, ExtremeWare permits VLANs in different
STPDs to share the same port when tagged.
A. True
B. False
Answer: B

certification Extreme Networks   EW0-100 examen   EW0-100 examen   EW0-100

Le Certificat de Extreme Networks EW0-100 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Extreme Networks EW0-100, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test EW0-100 sans aucun éffort, en même temps, le test de Extreme Networks EW0-100 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Extreme Networks EW0-100 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.


2013年7月7日星期日

Les meilleures Extreme Networks EW0-200 examen pratique questions et réponses

Est-que vous s'inquiétez encore à passer le test Certification EW0-200 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Extreme Networks EW0-200? Si vous voulez réussir le test Extreme Networks EW0-200 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.


Avec l'aide du Pass4Test, vous allez passer le test de Certification Extreme Networks EW0-200 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Extreme Networks EW0-200, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.


But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test Extreme Networks EW0-200 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test Extreme Networks EW0-200, votre argent sera tout rendu.


Vous aurez une assurance 100% à réussir le test Extreme Networks EW0-200 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.


Code d'Examen: EW0-200

Nom d'Examen: Extreme Networks (Extreme networks associate(ena))

Questions et réponses: 240 Q&As

Dans cette Industrie IT intense, le succès de test Extreme Networks EW0-200 peut augmenter le salaire. Les gens d'obtenir le Certificat Extreme Networks EW0-200 peuvent gagner beaucoup plus que les gens sans Certificat Extreme Networks EW0-200. Le problème est comment on peut réussir le test plus facile?


EW0-200 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-200.html


NO.1 If you wish to silently drop all traffic destined for IP network 100.219.10.0/24 with a gateway of
10.219.10.1/24 and without receiving any ICMP messages that would otherwise be generated, which CLI
command would you execute?
A. configure iproute delete 100.219.10.0/24 gateway 10.219.10.1
B. configure iproute default 100.219.10.0/24
C. configure iproute add blackhole 100.219.10.0/24 gateway 10.219.10.1
D. configure iproute add blackhole 100.219.10.0/24
Answer: D

Extreme Networks   EW0-200   certification EW0-200   EW0-200

NO.2 Which of the following CLI commands would you use to enable ECMP for RIP?
A. enable rip route sharing
B. enable route sharing rip
C. enable iproute sharing
D. None of these, ecmp is not supported by RIP
Answer: D

certification Extreme Networks   certification EW0-200   certification EW0-200   EW0-200

NO.3 Which statement is true? In a PC, the configured default gateway:
A. Is always within the PC IP (sub) network.
B. Is always outside the PC IP (sub) network.
C. Is always behind a router.
D. Can be anywhere.
Answer:A

Extreme Networks   certification EW0-200   certification EW0-200   certification EW0-200   EW0-200   certification EW0-200

NO.4 A 802.1Q tag is a marker inserted between the source and destination MAC addresses fields of the
Ethernet frame.
A. TRUE
B. FALSE
Answer: B

Extreme Networks examen   EW0-200 examen   EW0-200   EW0-200 examen   EW0-200   EW0-200 examen

NO.5 In spanning tree, the designated bridge is the bridge with the:
A. least-cost path to the root bridge
B. highest bridge priority
C. lowest port cost on all ports
D. None of these
Answer:A

certification Extreme Networks   EW0-200   EW0-200   EW0-200   EW0-200   EW0-200

NO.6 In ExtremeWare, active VLANs that are configured with ports and an IP address and configured to
forward IP and run a routing protocol will have their subnet advertised.
A. TRUE
B. FALSE
Answer:A

Extreme Networks   certification EW0-200   EW0-200   EW0-200 examen

NO.7 Given the following information, select the option that would allow you to change the active
ExtremeWare version to 6.1.9b11 upon reboot.
A. use image primary
B. download config primary
C. use config primary
D. download image primary
Answer:A

Extreme Networks   EW0-200 examen   EW0-200   EW0-200 examen   EW0-200 examen   certification EW0-200

NO.8 What CLI command is used to disable learning of incoming RIP routes on an interface?
A. disable rip learning <VLAN>
B. configure rip rxmode none <VLAN>
C. configure rip interface <VLAN> passive
D. None of these
Answer: B

Extreme Networks examen   certification EW0-200   EW0-200   EW0-200

NO.9 Which step would you take to configure a VLAN to only allow IP-related traffic?
A. config <vlan> protocol ip
B. config protocol <vlan> ip
C. config ip protocol <vlan>
D. None of these.
Answer:A

Extreme Networks examen   certification EW0-200   certification EW0-200   EW0-200   certification EW0-200

NO.10 This type of OSPF router has its router interfaces connected into multiple OSPF areas.
A. ASBR.
B. ABR.
C. DR.
D. BDR.
Answer: B

Extreme Networks examen   EW0-200   certification EW0-200   EW0-200 examen

NO.11 Which CLI command would you use to create a default route with a metric of 5 and a gateway of
10.0.0.1?
A. CONFIG IPROUTE ADD DEFAULT 10.0.0.1 5
B. CONFIG IPROUTE ADD DEFAULT 5 10.0.0.1
C. CREATE IPROUTE ADD DEFAULT 10.0.0.1 5
D. CREATE IPROUTE ADD DEFAULT 5 10.0.0.1
Answer:A

Extreme Networks   EW0-200   EW0-200

NO.12 Extreme Networks switches build their forwarding database from the incoming packet field information
containing the:
A. Source MAC address.
B. Destination MAC address.
C. Source IP address.
D. Destination IP address.
Answer:A

certification Extreme Networks   EW0-200   EW0-200   certification EW0-200   certification EW0-200

NO.13 Which CLI command would you use to configure the switch to ignore STP for selected VLANs?
A. enable ignore-stp vlan <stpd>
B. enable ignore-bpdu stpd <stpd> vlan <vlan>
C. enable ignore-bpdu stpd <stpd>
D. enable ignore-stp vlan <vlan>
Answer: D

certification Extreme Networks   EW0-200   certification EW0-200   certification EW0-200   EW0-200

NO.14 How would you stop a scheduled configuration download from happening? Use the CLI command:
A. cancel configuration download
B. download configuration cancel
C. configuration download cancel
D. delete configuration download
Answer: B

Extreme Networks   EW0-200 examen   certification EW0-200   EW0-200

NO.15 Which of the following protocol filter/s is/are predefined in ExtremeWare?
A. OSPF
B. TCP
C. NETBIOS
D. All of these
Answer: C

Extreme Networks   certification EW0-200   EW0-200   EW0-200

NO.16 Which CLI command will you use to change the CLI prompt from the default display to Switch02?
A. CONFIG SNMP SYSLOCATION Switch02
B. CONFIG SNMP SYSNAME Switch02
C. CONFIG CLI PROMPT Switch02
D. CONFIG CLI DISPLAY Switch02
Answer: B

Extreme Networks   EW0-200   EW0-200 examen   EW0-200   EW0-200   certification EW0-200

NO.17 ExtremeWare, pre-installed on every Extreme Networks ?chipset switch, combines industry standard
protocols to ensure interoperability with legacy switches and routers, QoS for bandwidth management
and traffic prioritization in today networks.
A. TRUE
B. FALSE
Answer:A

certification Extreme Networks   EW0-200   EW0-200

NO.18 An Extreme Switch is shipped with a pre-configured VLAN called DEFAULT that has all switch ports as
tagged members.
A. TRUE
B. FALSE
Answer: B

Extreme Networks   EW0-200   EW0-200

NO.19 The default administrator login name for a new Extreme switch was entered as ADMIN (all caps). This
will allow the administrator access to the CLI.
A. TRUE
B. FALSE
Answer: B

certification Extreme Networks   EW0-200 examen   EW0-200 examen   EW0-200

NO.20 The CLI console port utilizes a serial cable for physical switch to terminal connection.
A. TRUE
B. FALSE
Answer:A

certification Extreme Networks   EW0-200   EW0-200   EW0-200 examen

Pass4Test est un site d'offrir la bonne Q&A Extreme Networks EW0-200. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.