Pour vous laisser savoir mieux que la Q&A IBM C4040-129 produit par Pass4Test est persuadante, le démo de Q&A IBM C4040-129 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test IBM C4040-129 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.
Vous allez choisir Pass4Test après essayer une partie de Q&A IBM C2010-593 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification IBM C2010-593.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel IBM A2010-597 peut vous assurer à réussir 100% le test IBM A2010-597. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de IBM après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
Code d'Examen: C4040-129
Nom d'Examen: IBM (IBM i 7.1 Administration)
Questions et réponses: 164 Q&As
Code d'Examen: C2010-593
Nom d'Examen: IBM (IBM Tivoli Netcool/OMNIbus V7.4 Fundamentals)
Questions et réponses: 70 Q&As
Code d'Examen: A2010-597
Nom d'Examen: IBM (Assess: IBM TRIRIGA Application Platform V3.2.1 Application Development)
Questions et réponses: 131 Q&As
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test IBM C4040-129, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test IBM C4040-129 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat IBM C4040-129 sans aucune doute.
Dépenser assez de temps et d'argent pour réussir le test IBM C2010-593 ne peut pas vous assurer à passer le test IBM C2010-593 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.
Le test simulation IBM C4040-129 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test IBM C4040-129 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
C4040-129 Démo gratuit à télécharger: http://www.pass4test.fr/C4040-129.html
NO.1 Due to an application problem, management has requested the IPL of a partition running IBM i
7.1. The administrator initiates the IPL, and during the restart phase notices the IPL is running in
manual mode even though the HMC partition settings indicate B NORMAL.
Why is the IPL running in manual mode?
A. The PWRDWNSYS command restart parameter is set to *MANUAL.
B. Manual is the default IPL mode when there is a console problem.
C. The QIPLTYPE system value is set to "Attended IPL, Console in debug mode".
D. Manual is the default IPL mode when the previous system end indicator is abnormal.
Answer: C
certification IBM certification C4040-129 C4040-129 examen
NO.2 An administrator has been asked to update an IBM i 7.1 system to the most current
Technology Refresh available from IBM. Which method is the most appropriate to achieve the
update?
A. Perform a D-mode IPL using the Technology Group PTF package SF99707.
B. Perform a slip install using the most current 1_Base_01 resave media available.
C. Perform a scratch install using the most current 1_Base_01 resave media available.
D. Perform an install of the Technology Group PTF package SF99707 using the GO PTF menu.
Answer: D
IBM certification C4040-129 C4040-129 C4040-129
NO.3 Journaling of a large library is running on SYSTEMA and the journal is system managed.
Remote journaling to
SYSTEMB has been configured. Due to a communications problem between SYSTEMA and SYSTEMB,
remote journaling is not working and cannot be quickly restarted.
Disk utilization on SYSTEMA is increasing rapidly. To reduce disk utilization the administrator tries to
delete journal receivers on SYSTEMA. Attempts fail and the following message displays:
CPF705F: Receiver not replicated to 1 remote journals.
What must the administrator do to delete journal receivers on SYSTEMA?
A. Delete and recreate only the journal, and then delete the receivers.
B. Stop journaling, as this must be ended first, and then delete the receivers.
C. Use the DLTJRNRCV command and change the delete option parameter to ignore target receivers.
D. Use the CHGJRN command to change the Manage Receivers parameter to allow user
management of journal receivers and then delete the receivers.
Answer: C
IBM examen C4040-129 examen C4040-129
NO.4 Which statement describes server firmware delivery that uses PTF5 on a POWER7 system?
A. A single IBM i (57703S1) PTF is ordered to update server firmware.
B. The firmware is ordered using the marker PTF ID, such as MHxxxxx, and is installed with normal
IBM i PTE commands.
C. The server firmware PTE (MFxxxxx) is ordered from the connected HMC and is sent to the service
partition for install.
D. The HIPER PTF group is ordered for the Licensed Internal Code (5770999) and the order is flagged
with Include Firmware Update *YES.
Answer: A
IBM examen certification C4040-129 C4040-129 examen certification C4040-129
NO.5 A company has just purchased a new POWER7 server running IBM i 7.1 to replace an older
system running V5R4M5. Due to a mistake by a programmer on the V5R4 system, data was
accidently deleted. To recover, the administrator backs up the deleted data to virtual tape on the
7.1 server and attempts to restore it on the V5R4 server. The restore on the V5R4 server fails with a
message stating the data was saved from a more recent release of the operating system.
Which option will solve this problem?
A. Save the data to physical media.
B. Set the target release parameter to V5R4M0 when saving the data.
C. ETP the virtual tape image catalog from the 7.1 server using binary mode.
D. Use the target release parameter *RECOVER and the access path parameter set to VSR4MO.
Answer: B
IBM examen certification C4040-129 certification C4040-129 certification C4040-129 certification C4040-129
NO.6 A customer is upgrading an HMC to a new release using Recovery DVD5 for the new release
level. Which action must be completed before performing the upgrade from DVD process?
A. Run the 'HMC Management> Back Up HMC Data' to DVD.
B. Run the 'HMC Management> Save Upgrade Data' to HMC disk.
C. Run the 'HMC Management> Back Up HMC Data' to NFS server.
D. Run the 'HMC Management> Save Upgrade Data' to the administrator's PC.
Answer: B
certification IBM C4040-129 examen certification C4040-129
NO.7 An administrator needs to restore a physical file DATALIB/SMALLFILE from a Save 21 backup
of library DATALIB. DATALIB has several hundred large database files plus other objects.
The administrator has the job log and output from the last full save of DATALIB.
What should the administrator do to restore SMALLFILE in the shortest time?
A. Run the RST command for object "/QSYS.LIB/DATALIB.LIB/SMALLFILE.FILE"
B. Delete SMALLFILE, run RSTLIB specifying *NEW objects, and specify library DATALIB as the
starting library.
C. Run RSTLIB for library DATALIB specifying the position parameter for SMALLFILE in library DATALIB
from the output of the save.
D. Run RSTOBJ for DATALIB/SMALLFILE specifying the position and sequence number for SMALLFILE
in library DATALIB from the output of the save.
Answer: D
IBM examen certification C4040-129 certification C4040-129
NO.8 An administrator maintains four image catalogs on a host partition that are used by
network-based virtual optical drives. Periodically, images are added or removed from the catalog
and it must be re-exported.
What is the simplest method to update the share and NES export?
A. Create a CL program.
B. Create a REXX program.
C. Create a Qshell script.
D. Run the statements manually as needed.
Answer: B
IBM examen certification C4040-129 certification C4040-129 certification C4040-129 certification C4040-129
没有评论:
发表评论